APPLICATION PROCEDURES
1. Sand the wood surface withh sandpaper no. 180 and make sure surface is free of dust and dirt
2. Apply Ultran Lasur by brush, wait until it dries out (6 – 8 hours)
3. Before adding another layer for extra protection, make sure to sand lightly with sandpaper no.400
4. Apply at least three coats of Ultran Lasur for long lasting protection against weather
| ULTRAN LASUR EL-501 | |
| Type | Solvent Based |
| Specific gravity | 0.90 ± 0.02 g/cc |
| Solid Content | 33 ± 5 % |
| Coating Amount | 5 – 6 m2/lt (for 2x coatings) 3 – 4 m2/lt (for 3x coatings) |
